GC-1325-V Vertical Round Carving CNC Router Buddha Engraving Machine for Cyliner Material
GC-1325-V Vertical Round Carving CNC Router Buddha Engraving Machine for Cyliner Material
Item | Parameter |
X、Y、Z Axis positioning accuracy | 0.02mm |
X、Y、Z Axis repeat positioning accuracy | 0.01mm |
X、Y、Z working area | 1000*1300*2500mm |
X、Y、Z Transmission | Screw transmission，Taiwan HIWIN, Linear guide |
Working area | 1300*2500mm |
Controller | DSP controller |
Maximum feed height | 1000mm |
Spindle motor power | 5500W /380V |
Maximum spindle clamping tool | 3.175/4/6/8/10/12.7 /14/16mm |
Spindle cooling mode/spindle speed | 0-24000rpm/min |
Fast speed of space travel | 20m/min |
Driving system | Servo motor and driver |
Operating voltage | 380V |
Machine frame | High quality reinforced bridge steel, New design |
Configuration:
1. Structure: thickened bed without deformation, small shaking when working, fine engraving effect
2. Drive: Weishi servo, strong power, smooth transmission, small heat, good closed-loop control, can be used for a long time without stopping.
3. Control system: DSP control system, strong anti-interference ability, stability, can control more parameters.
4. Transmission: screw transmission, high efficiency, high precision
5. Guide rail: Taiwan square straight line 30 increase guide rail, high precision, good stability
6. Main shaft: constant power frequency conversion cooling main shaft, low noise (seiko).
7. Oil filling: automatic oil filling system.
8. Transmission: High precision flange 80/ reducer, wear-resistant, strong strength, long-term use is not easy to wear
High speed, high precision and good stability.
Applicable scope: stone, jade, metal, wood, etc
Provide local technical support
