GC1390L CO2 Laser Metal Nonmetal Cutting Machine for Sale at Affordable Price
GC1390L CO2 Laser Metal Nonmetal Cutting Machine for Sale at Affordable Price
1, Mixed-cut: metal steel such as stainless steel, carbon steel, and nonmetal such as acrylic, wood, etc.
2, High precision: X/Y axis adopt Leadshine servo motor with high precision belt transmission, improve the response speed and cutting precision, extend service life.
3, Good stability: optimized the nc system control, it can meet the precision parts processing, stable dynamic performance, also can work for long hours.
4, The cutting section with good quality: mechanical follow-up cutting head system, cutting head always follows the material to keep the cutting point locaation unchanged, which insures smooth cutting section without processing again. It can adopt to flat or curved surface sheet cutting.
5, Adopt sealed co2 laser tube, main consumable items are electric energy, water cooling, auxiliary gas and laser light.
6, Simple structure, easy operation, stable laser device and low maintenance cost.
Model | GC1390L |
Laser medium | CO2 |
Working area | 1300*900mm |
Working table | Blade table |
Laser power | 130W/150W/260W |
Power Supply | 380v/ 220V/50Hz, 110V/60Hz |
Min line width | ≤0.15mm |
Positon accuracy | 0.01mm |
Repetition accuracy | 0.02mm |
Cutting speed | 150 mm/s |
Guide rail | Hiwin from Taiwan |
Transmission method | TBI Ball screw from Taiwan |
Drive system | Stepper motor and driving system |
Cooling system | Water-cooling |
Control system | Ruida |
Control software | Coreldraw, Photoshop, AutoCAD, Tajima |
Graphic format support | PLT, DXF, BMP, JPG ,AI ,ect |
Parameter of CO2 Laser Metal Nonmetal Cutting Machine GC1390 :
|
Thicken machine frameAdopt Thicken machine bed, heavy loading, Not easy to get distort Adopt Advanced Germany Mix Cutting Technology It supports both Metal and Non-Metal Cutting, can cut stainless steel, carbon steel, mild steel, also can cut acrylic, wood, MDF engraving and cutting. |
Thicken Strip Working Table Specially Used for CuttingMeets the need of diversified laser procession High precision linear guide railDust-proof and auto lubricate with lower noise volume Optional Configuration: |
Water Cooler
Model: CW3000/CW5000/CW5200
Original: China
Installation requirements:
Install in strict accordance with CW-3000 water tank schematic.
Plug in the signal line and fail to install as required.
Use pure water, change water better every 10-15 days.
Environment: temperature 2-40 degrees, humidity 10-60%
RECI laser tube W6 model:
Auto-focus Laser Cutting HeadWhen the metal sheet is not plain, the dynamic focus laser cutting head can adjust the focusing distance automatically. Realize the accuracy of cutting effect. Pre-view and pre-run function |
Unique Mirrors and Lens Cooling TechnologyAll mirrors and lens is cooled by water |
Control PanelModel: 708C2 |
Standard Parts
- Moterized up/down worktable + Auto-Focus device + Red Light pointer
- 1× CW-3000/5000/5200 Water Chiller/Water Pump
- 1× Honeycomb table/Blade Table
- 1× Air compressor + 1×Exhaust blower + 1×Smoke pipe.
- 1× USB cable (Connecting pc and machine)
- 1× CD (Including PHCAD operating software, user-friendly instruction manual, guiding videos.)
- 1× Power cable
- 1× Tool box
Applicable Material for laser cutting machine for fabric:
Metal: Stainless steel, carbon steel, mild steel, galvanized sheet,
Nonmetal : rubber, plastic, cloth, leather, acrylic, MDF, plastic, bamboo, woollens, organic glass, tile,jade, bamboo, wood, rubber, etc.
